Power transmission bearing products supplied by Pooley Inc. represent the top industrial products from the top industry leaders. In this category we supply a wide range of products to meet the most demanding of industrial applications for customers across Buffalo, Rochester, Syracuse, and Niagara Falls, New York, plus Erie, Pennsylvania areas. We offer belts, chains, gears, and sprockets that are suitable for heavy to light duty material handling situations. Our inventory is also comprised of idlers, bearing, sheaves, motors, and gear motors to optimize your machinery and increase performance and profitability. Partnering with industry leaders such as ABB/Dodge, Continental Contitech, IDC-USA, and SEW Eurodrive enables us to offer you one-stop shopping for top-notch products. To learn more about our array of power transmission bearing products, please contact Pooley Inc. today.

Power Transmission Technical DocumentationRequest Information

Click here to view ABB/Dodge Product Specification

ABB offers a total power transmission solution.

For well over a century, the Dodge® line of bearings, gearing and power transmission components have helped manufacturers in numerous industries increase the productivity and profitability of their operations. By focusing on each industry and concentrating on its specific needs, we have developed innovative product solutions and advanced technologies that help improve output, decrease downtime, and enhance system value.

Click here to view Contiental Contitech Engineering Product Specification

Contitech – Supplier & Distributor of Belts and Sprockets

Belt Teeth: 200 to 315
Belt Length: 110.24″ to 173.62″
Belt Width: 0.79″ to 2.07″
Belt Thickness: 0.34″ to 0.39″
Belt Weight: 0.95 lbs. to 7.44 lbs.
Belt Pitch: 8mm to 14mm
Sprocket OD: 4.802″ to 37.786″
Sprocket Weight: 3.7 lbs. to 161.0 lbs.
Operating Temp: -70°F to +210°F

Colors

  • Green
  • Blue
  • White
  • Red
  • Black
  • Yellow
  • Beige
  • Brown
  • Transparent

Resistances

  • Aging
  • Hydrolysis
  • UVA Rays
  • Ozone
  • Oils/Greases/Fats
  • Gasoline
  • Acids

Sprocket Material

  • Cast Iron
  • Ductile Iron

Belt Materials

  • Polyurethane
  • Natural Rubber
  • Cellular Rubber
  • Thermoplastic Rubber Compound
  • Fluoroelastomer
  • Polyamide
  • PTI
  • PVC

Belt Coatings

  • Thermoplastic Rubber
  • Transparent Polyurethane
  • Open Cellular Neoprene Rubber
  • Foamed Polyurethane
  • PVC
  • Natural Rubber

Click here to view IDC-USA Product Specification

IDC – USA is a Supplier & Distributor of Idlers, Bearings and Sheaves

Operating Temp: -4°F to 250°F
Tolerances: +0.000/-0.0003 to +0.000/-0.20
Chain Size: 25 to D100
Number of Teeth: 9 to 31
Bore: 1/2″ to 5/8″
Strand Chain: 1 to 2
Sprocket Weight: 0.15 lbs. to 11.30 lbs.
Tensioner Weight: 0.18 lbs. to 40.03 lbs.
Sprocket OD: 1.65″ to 7.01″
Sprocket ID: 1/2″ to 1-1/2″
Sprocket Width: 1/2″ to 2-1/2″
Tensioner Length: 2″ to 23″
Tensioner Width: 1-13/16″ to 7″
Idler/Bushing OD: 11/16″ to 11″
Idler/Bushing ID: 3/8″ to 1-3/4″
Idler/Bushing Width: 0.84″ to 6-3/4″
Idler/Bushing Weight: 0.40 lbs. to 22.0 lbs.
Idler/Bushing Gauge: 13 to 14
Shaft Weight: 0.16 lbs. to 12.5 lbs.
Pulley OD: 1.63″ to 37.786″
Pulley ID: 0.25″ to 0.500″
Pulley Width: 0.50″ to 7-3/8″
Pulley Weight: 0.02 lbs. to 334.8 lbs
Number of Pulley Teeth: 10 to 216
Bearing OD: 10mm to 240mm
Bearing Width: 4mm to 68.3mm
Bearing Weight: 0.002 lbs. to 21.00 lbs.
Bearing Speed Rate: 2,000 RPM to 73,000 RPM
Pillow Block Shaft Dia: 1/2″ to 2-7/16″
Pillow Block Weight: 0.24 lbs. to 8.377 lbs.
Sheave OD: 2.00″ to 50.40″
Belt Weight: 0.013 lbs. to 43.80 lbs.
Belt Outside Length: 21″ to 603″
Belt Datum Length: 20.3″ to 601.0″
Belt Width: 0.375″ to 1.50″
Belt Height: 0.22″ to 0.91″
Number of Belt Teeth: 25 to 550

Insert Bearing

  • Eccentric locking collar
  • Set screw
  • Light duty eccentric
  • Light duty set screw
  • Light
  • duty eccentric with cylindrical OD
  • Light duty set screw with cylindrical OD
  • Cylindrical OD with snap ring and groove

Housing

  • Standard pillow block
  • Oval two-bolt flange
  • Square four-bolt flange
  • Take up unit
  • Light duty oval two-bolt flange
  • Tapped base unit
  • Thermoplastic pillow block
  • Stainless steel pillow block
  • Thermoplastic two-bolt flange
  • Stainless steel two-bolt flange
  • Thermoplastic four-bolt flange
  • Stainless steel four-bolt flange

Grease Types

  • Shell Alvania RL2
  • Mobil Polyrex EM
  • Chevron SRI-2
  • Mobil FM102
  • Lithium Based #2
  • Dow Corning Molycote 44

Click here to view SEW EuroDrive Product Specification

Distributor of SEW – Motors and Gear Units

Motor Size: 0.12 HP to 7.5 HP
Max Output Torque: 37 lb-in to 442,300 lb-in
Gear Ratio: 1.3 I to 289.74 I
Operating Temp: -40°F to 80°F
Current Consumption: <90 mA to 100 mA
Operating Voltage: 10 V to 500 V
Frequency: 0.125 Hz to 500 Hz
Rated Torque: 4.58 lb-in to 10,708 lb-in
Rated Speed: 840 rpm to 3,510 rpm
Rated Current (AC): 0.23 A to 335 A
Mass of Motor: 13.2 lbs. to 2,889 lbs.

Materials Used

  • Stainless Steel
  • Aluminum
  • Cast Iron

Click here to view the Toshiba Products & Parts Supply Specifications

  • EISA Efficiency Compliant
  • All stainless steel construction
  • IP54 Protection
  • Bearing Lock Nuts for Vertical Mounting
  • C-Flange Available through 365T Frame
  • Dual-Frequency 50/60 Hz Design (50/60 Hz Listed on Nameplate on 1 though 75 HP)

Manufacturer's

Other Manufacturer's We Carry
 

Manufacturers Videos

HOW CAN WE BE OF SERVICE?