Hose Assemblies | Pooley Inc.

Dixon – Quick Coupling

Body Size: 1/8″ to 3″
End Size: 1/8″ to 3″
Max Working Pressure: 200psi to 11,000 psi
Burst Pressure: 1,000psi to 36,800psi
Air Flow: 17 SCFM to 4,200 SCFM
Length: 0.90″ to 11.50″
Outer Diameter: 0.35″ to 6.73″
Weight: 0.02 lbs. to 17.10 lbs.
Bag Quantity: 1 to 250
Box Quantity: 1 to 500

Materials

• Aluminum
• Brass
• Naval Brass
• Stress Relieved Brass
• 303 Stainless Steel
• 316 Stainless Steel
• Nitronic Stainless
• Plastic

Valve Options

• Un-valve
• Poppet Valve
• Valve Actuator
• Heavy Duty Valving
• Tube Valve
• Prong Valve
• Ball Valve
• No-Spill Valve
• Single Shutoff
• Double Shutoff

Seals

• Viton™
• FDA Viton™
• EPDM
• Neoprene
• Silicone
• Urethane
• Aflas™
• Kalrez™
• PTFE
• Silicone
• PTFE / Silicone
• Fluorosilicone
• FDA EPDM
• EPDM
• Steam EPDM
• AFLAS
• FDA Nitrile
• Fuel Nitrile
• Cold Nitrile
• Celazole Back-up
• Chemrez

End Connection

• NPTF Female
• NPTF Male
• DSPP Female
• BSP Male
• Female ORB
• Male ORB
• JIC Male
• JIC Bulkhead
• Hose Barb
• Push-Loc
• Reusable

Sleeves

• Locking Sleeve
• Flanged Sleeve
• Flanged Locking Sleeve
• Silicone Fryer Boot
• Push-To-Connect Sleeve
• Thermal Guard Sleeve
• Automatic Latch Pin
• Automatic Ball Latch
• Thermal Guard Sleeve
• Hex Nut Sleeve
• Tangle Prevention
• Flanged Nylon Sleeve
• No Locking Sleeve
• Black Oxide Plating
• Bright Nickel Plating
• Electroless Nickel Plating
• PTFE Coating
• Standard Nickel Plating
• Chrome over Nickel
• Oxygen Clean

Connection

• Balls
• Threaded
• Other

Dixon Sanitary Hoses

Temp Use Range: -60°F to 450°F
Amperage: 0.3A to 4A
Voltage Range DC: 5V to 125V
Voltage Range AC 24V to 440V
Size: 1/4″ to 4″
Pressure: 3 psi to 1,000 psi
Weight: 0.53 lbs. to 297 lbs.
Motor Speed: 1450rpm to 3600rpm
Pump HP: 0.25HP to 60HP
Frequency: 50Hz to 60HZ

Products

• Seat Valves
• Diaphragm Valves
• Ball Valves
• Butterfly Valves
• Rack Actuators
• Pinion Actuators
• Electric Actuators
• Canister Actuators
• Manual Operators
• Limit Switches
• Solenoids
• Positioners
• Controls
• Cordsets
• Receptacles
• Check Valves
• Sample Valves
• Pumps
• Filters
• Strainers

Materials

• 304 Stainless Steel
• 316 Stainless Steel
• Brass
• EPDM
• Silicone
• Viton®
• PTFE
• POM
• TFM 1600

Operation

• Double Action
• Spring Return Normally Closed
• Spring Return Normally Open

Ports

• Clamp
• Weld
• Female I-Line
• Male I-Line
• Threaded Bevel
• Q-Line
• John Perry Plain
• John Perry Threaded
• Extended Weld
• Combination

Body Type

• L
• T
• Y
• LL
• TT
• TL
• F
• Tank

Surface Finish

• SF1
• SF2
• SF3
• SF4
• SF5
• SF6

Rotation

• 90°
• 180°

Dixon Valve and Accessories

Operating Temp: -65°F to 500°F
Pressure: 35 psi to 10,000 psi
Body Size: 1/8″ to 8″
Thread Size: ¼” to ¾”
Hose: 1/8″ to 14″
OD: 14/64″ to 20″
Weight: 0.84 lbs. to 157 lbs.

Products

• Fittings
  • Cam Fittings
  • Groove Fittings
  • Dry Disconnects Fittings
  • Swivel Joints
  • Boss Fittings
  • Air Fittings
  • Shank Fittings
  • Water Fittings
  • Brass Fittings
  • Pipe Fittings
  • Welding Fittings
  • Tank Truck Fittings
  • Plastic Fittings
  • Hydraulic Fittings
  • Holedall Fittings
  • Sanitary Fittings
  • BPE Fittings
  • PTFE Fittings
  • Fire Equipment Fittings
  • Gauges
  • Thermometers

• Clamps
  • Interlocking Clamps
  • Preformed Clamps
  • Internal Expansion Clamps
  • Double Bolt Clamps
  • Crimp Clamps
  • Flat Seal Clamps
  • Band Clamps
  • Buckle Clamps
• Valves
• Rack Equipment
• PTFE Hoses

Material

• Forged Steel
• 303 Stainless Steel
• 304 Stainless Steel
• 316 Stainless Steel
• Galvanized Steel
• Brass
• Iron
• Plated Steel
• Carbon Steel
• 201 Stainless Steel
• Aluminum
• Anodized Aluminum
• ABS
• Nylon
• Polypropylene
• Acetal
• Thermoplastic
• Polyethylene
• PVC

Seal Material

• Buna
• Viton®
• PTFE
• Silicone
• Kalrez®
• EPT
• PTFE
• Chemraz®

Contitech – Hoses

% Ethanol Gas Compatible: 15% to 100%
% Biodiesel Gas Compatible: 20% to 100%
Aromatic Content: 50% to 60%
Operating Temp: -65°F to +450°F
ID: 1/16″ to 18″
OD: 0.126″ to 19.94″
Max WP: 15 psi to 6,000 psi
Min Bursting Pressure: 140 psi to 24,000 psi
Weight: 0.005 lbs/ft to 33.29 lbs/ft

Material Used

• PVC
• TPE
• Modified Cross-Link
• Polyethylene
• Carboxylated
• Nitrile
• Nitrile OR Buna-N
• Buna-N-Vinyl
• Chlorinated
• Polyethylene (CPE)
• Chlorobutyl
• Viton
• Hypalon
• Nylon
• EPDM (abrasion resistant)
• SBR
• EPDM
• Ultra High Molecular
• Weight Polyethylene
• Polyvinyl Chloride
• Natural Rubber
• Cross-Link
• Polyethylene
• Urethane
• Fluorinated
• Propylene OR PTFE®
• Thermoplastic
• Elastomer
• Polybutadiene
• Blend
• EPDM
• Butyl
• Neoprene

Adapter Material

• Aluminum
• Stainless Steel
• Brass

Materials Transported

• Water
• Mulch
• Woodships
• Gas
• Oil
• Air

St Gobain – Flexible Hoses and Tubes

Max Operating Temp: 125°F to 500°F
Durometer Harness: 40 to 82
Tensile Strength: 800 psi to 6,050 psi
Tear Resistance: 52 lb.-f/in. to 475 lb.-f/in.
Brittle Temp: -450°F to -6°F
Water Absorption %: <0.01 to 0.49
ID: 0.010″ to 7-3/8″
OD: 0.030″ to 9-3/8″
Wall Thickness: 0.010″ to 0.5″
Max Working Pressure: 3 psi to 5,000 psi
Max Bend Radius: 1/8″ to 29.9″
Min Bend Radius: 0.75″ to 36.0″
Silicon Hose Size: 1/4″ to 4″
Hose Ply: 1 Ply to 4 Ply
Min Burst Pressure: 120 psi to 16,000 psi
Max Length: 20′ to 150′

Stem Materials

• 316L Stainless Steel
• Polymer
• PTFE
• FEP
• Silicon
• PFA

Colors

• Clear
• Transparent
• Black
• Translucent Yellow
• Translucent
• Cream
• Silver
• Red
• Blue
• Violet
• Green

End Connectors

• TC Sanitary Step-up Size
• TC Sanitary Clamp
• MPT Male Pipe Thread
• AF Flange End
• TE Tube End
• EM Male I-Line
• BM Male ACME Thread
• CF Female Cam + Groove
• EF Female I-Line
• BS Bevel Seat & Hex Nut
• CM Male Cam + Groove
• MPT Male Pipe Thread
• XTE Extended Shank
• PE Perlick End

Features

• Elevated Temp
• CIP, COP, SIP Suitable, and Autoclavable
• Lightweight and abrasion-resistant
• Excellent durability
• Higher pressure rating
• Chemically resistant
• Superior impact resistance
• Reusable

• Medium weight thermoplastic rubber hose reinforced with a spring steel wire helix & external polypropylene wearstrip
• Wearstrip offers additional external abrasion & drag resistance
• Designed for applications with wide temperature ranges

• Smooth interior assures minimal friction loss efficient air flow
• Wall Thickness = .030″
• Available in metric sizes, consult sales team on pricing & minimums